An alarm system is only as good as its sensors. The panel and the siren do nothing until a sensor reports something, and a sensor in the wrong place either misses the event or cries wolf. Knowing what each type detects helps you choose and place them. This guide covers the common types and how to install them.
Door and window contacts
A contact has two parts: a sensor on the frame and a magnet on the moving door or window. When the two separate, the sensor reports an opening. Contacts are reliable, cheap and easy to understand, and they catch an intruder at the moment of entry. Use them on every door and on the windows that can be reached from outside. Fix the magnet and the sensor within the alignment given in the product's instructions.
Motion sensors
Most motion sensors detect the change in infrared heat when a person moves across the room. Some combine that with a second technology, such as microwave, to reduce false alarms. Choose a standard sensor for clean, stable rooms, and a dual-technology one where heat, sunlight or air movement can confuse it, such as near a window, a kitchen or a warehouse door. Mount the sensor so that an intruder walks across its field of view, not straight toward it.
Glass-break sensors
These listen for the sound pattern of breaking glass. They suit shop fronts, large windows and glass doors, where a contact would not trigger until the glass is already gone. The correct distance and angle depend on the model and on the glass, so follow the sensor's specification, and confirm the details with the supplier before installing.
Panic buttons and tamper protection
A panic button lets a person call for help in a hold-up or medical emergency, and it can be fixed under a desk or kept in a pocket. Tamper protection is a switch inside sensors and the panel that reports when the cover is opened or the device is pulled off the wall. It prevents an intruder from silently disabling the system.
Smoke and gas detectors are a separate system
Fire and gas detection has its own requirements and its own detectors. A panel may show their status, but plan them as a separate system, and do not treat an intruder alarm as fire protection.
Wired and wireless sensors
Wired sensors need cables, which suits new buildings and renovations, and they have no batteries to change. Wireless sensors are simple to add to a finished building and easy to move. They use batteries and a radio link, so choose a system that reports a low battery and a lost signal. Many installations mix both.
Placement rules
- Keep motion sensors away from heaters, air conditioners, direct sunlight and moving curtains.
- Mount sensors at the height the manual specifies, and do not aim them at windows.
- Protect the routes an intruder must use, and not only the rooms with the most valuable items.
Install, test and record
After installation, walk-test every motion sensor, open every contact, and trigger the siren. Check that the panel names each sensor clearly, so that an alert says "back door" and not "zone 7". Keep a list of the sensors, their locations and their battery dates for maintenance.
Mistakes to avoid
- Placing a motion sensor facing a window or a heat source.
- Forgetting to test after the furniture is moved.
- Using wireless sensors without checking battery and signal reports.
- Treating the intruder alarm as a replacement for fire detection.
Frequently asked questions
How is a standard motion sensor different from a dual-technology one?
A standard sensor uses infrared heat detection only. A dual-technology sensor needs two different signals before it raises an alarm, which lowers false alarms in difficult rooms.
How close to a window should a glass-break sensor be?
It depends on the model and the type of glass. Follow the specification of the sensor you choose, or ask your supplier to confirm the placement for your windows.
How do I know a wireless sensor battery is getting weak?
A good system reports a low battery on the panel or in the app. Check the report regularly and replace batteries before they run out.
Are there sensors that tolerate pets?
Yes, pet-tolerant motion sensors exist, but their behaviour depends on the model and the pet. Tell the installer about the pets and test them.
Send us the plan of your building with the button below, and we will suggest the sensors. See also our alarm service page and the guides on home alarms and business alarms.
Need help choosing the right system?
Contact us on WhatsApp and send the site type, size, and service needed.
WhatsAppService page